AutoPatch 8Y-XL Setup Guide download pdf (Page 22)

CPU

The CPU is in one of the expansion/control slots to the left of the output

connectors and has connectors (ports) for attaching external control

devices. The CPU also has a system status light, a network use light

(Ethernet Status indicator), and ports for linking to other enclosures.

Expansion/Control Slots

Each enclosure provides three expansion/control slots. One contains the

CPU board and two are for future boards that will increase functionality

and add new features to your system. One is located above the CPU and

one is below it.

Power Supply

The power supply is on the top left corner of the rear of the enclosure.

The power supply holds the power switch, power connector, and fuse

drawer. The power supply fan vent is to the right of the power supply

unit.

The 8Y-XL input voltage range is AC 100-240V single phase. The

power supply will accept all major, international, standard power sources

(see page B-1 for power supply specifications).

The fuse drawer is just above the power switch and contains two 2 AMP

Time Delay (5mm x 20mm) fuses.

Press the “0” side of the power switch to turn power off; press the “1”

side to turn it on.

We recommend surge protectors and/or an AC line conditioner.

Serial Number

The serial number for the system is located on the plate between the

input and output connectors.

Installation and Setup Guide 1-7

Rear of the Enclosure

Unpacking

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 82 83

No comments

AutoPatch 8Y-XL Setup Guide Page 22